viratsteelspecial

As one of India’s leading special steel suppliers, Virat Special Steels can supply the following industries requirement of steel practically off-the-shelf. Virat Special Steels Pvt. Ltd ., is one of India’s top Tool Steel, Die Steel suppliers, and Mold Steel Stuckists. This company provides special steel of every kind in sizes and shapes (flat, round, or bars) per customer requirements. Based in #Gurgaon (Haryana) & #Ludhiana (Punjab) India. Forging Industry  - Forging is a process in which metal is being shaped using compressive forces with a Hammer or a press. Forging are classified into Cold forging, warm forging or hot forging. Mainly material used:  Din 1.2714 ( DB6 ),  DIN 1.2344 ( H13 ),  DIN 1.2343 ( H11 ). Pressure Die Casting  – Die casting is performed by forcing molten metal under high pressure into a mold cavity & the cavity (mold cavity) is manufacture by using two hardened tool steel dies & perform similar to an injection mold. Mainly ...

DIN 2738 which is applicable for large & small plastic mold dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Boaster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Up setter Blocker, forging dies, Different dies & mold for plastic products etc. Although less expensive options such as Aluminum exist for making molds to be used for shaping plastic, steel is most often the optimum one. It may be impose more investment to begin with but this is offset by its undoubtedly greater operational life and better finish. Also the specialized steels that have been created for plastic molding make for rapid process speed – for any duration it can handle more repetitions than other materials and so enhance productivity. Steel properties as given below, however, have to be optimally matched to the specific application and these are: Degree of purity Polishability Uniformity of hardness and microstructure Wear resistance...

Our Serving Industries (part 1)  Our Special Steels recognized for great wear resistance, heat conductivity, hardness and robustness at increased temperatures. These steels have better features for use due to decreased sulphur level. #Forging Industry: Forging is a process in which metal is being shaped using compressive forces with a Hammer or a press. Forging are classified into Cold forging, warm forging or hot forging. Mainly material used: DIN 1.2714 (DB6), DIN 1.2344 (H13), DIN 1.2343 (H11). The Leading Company VIRAT SPECIAL STEELS PVT. LTD. is one of the largest Importer, Exporter and Stockist of Die Blocks ( DIN 1.2714 , DB6 , H13 , H11 ), Tool Steels, Die Steels, Special Steels and Alloy Steels in various grades. Learn more: https://www.viratsteels.com/ For more information Contact us: info@viratsteels.com , +91-9814021775

  H13 tool steel is the most popular steel grade for various Industries. The main features of high alloyed Cr-Mo-V Hot Work tool steel is high wear resistance to thermal shock and to heat cracking, good mechanical characteristics & toughness in hot condition.H13 appears excellent machinability with constant hardness during production activities. The equivalent steel grade H-13 / DIN 2344 / SKD61 / AISI H13 normally available in the annealed condition but in some specific applications, we provide Pre-Hard H13 with its standard hardness 460-500 BHN. Utilized for ejector pins, apparatus holders and shrink fit chucks. Highly recommend the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting & other component subjected to high working temperatures and high-pressure strength. H13 is fully ultrasonic inspected with 100% positive results as per NDT standards. H13 Steel Properties: High hot-wear resistance and hot tensile strength as well as good toughness, thermal...

[H11 #india | DIN 2343 #europe | AISI H11 #usa ] H11 Steel is an all-inclusive hot work tool steel with hot rigidity and durability. Good thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. Utilized for ejector pins, apparatus holders and shrink fit chucks. Steel Properties: Hot work tool steel with Chromium 5% has high strength and toughness, best thermal physical phenomenon and in susceptibility to hot cracking. This provides the essential necessities for long tool life in die-casting , Press Forging , extrusion processes etc. Application: Besides applications typical for the area of hot-work steels, this grade is especially used for ejector pins, tool holders, bridge kind tools, liner holders, Forging Dies, Hot work punches, and shrink work chucks. Virat Special Steels is the largest Supplier & Stockiest of H11 Steels , AISI H11 and DIN 2343 Hot Work Steel. #viratsteels , #viratsteelindia   , #h11stee...

  Because the DB6 steel offers desirable characteristics for hot metal forging dies manufacture... Think of different interventions in the developmental history of mankind and economy and you will stumble upon a few that really changed the pace and direction of growth. Steel is one such product and it is rather a much younger sibling of the parent metal iron; while Iron Age cultures synergized the human development in different parts of world. Steel gave the impetus and desirable perfection quotient to generate viability for many innovations. No wonder, we developed a passion for this alloy of iron and are still engaged in making its specialized types like the DB6 steel. DB6 which is also known as DIN 2714 in Europe, SKT4 in Japan and AISI L6 in USA is considered the perfect choice for the manufacture of closed forging dies. These dies are then used in various enterprising tasks in multiple verticals of economy. DB6 has found high acceptance in the expanding economies like...

Looking for PLASTIC MOULD STEEL (#DIN2738)? What is 2738 Steel or P20 Steels? This alloy is in the group usually branded as Mold Steels. Nickel and chromium are the alloying components for rigidity and durability. This alloy is most often used in the carburized circumstance. Naturally used for low temperature applications such as die casting dies and injection molds. P20+Ni is specially used for Plastic injection die moulds. The characteristics of a material are right sharpening, photo-etching properties with high purity and good homogeneity. P20+Ni is upgraded version of plastic mold steel 0f 2311, which normally supply in Pre hardened condition. Hardness in as supplied condition 280-320 HB with having uniform hardness. 2738 mold steel is a German DIN standard steel grade. DIN 1.2738 is specially used for Plastic injection die moulds. The characteristics of a material are right sharpening, photo-etching properties with high purity and good homogeneity. The additional ...