viratsteelspecial

DB6 tool steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. One of the most striking features of this substance is that it has uncommonly effect safe - a highly recommendable element, popular for vast mallet and press bites the dust alike. This elevation is mostly transferred in toughened condition or extinguished and tempered up to 1300 N/mm^2 and a working hardness of 370 to 410 HB round, or 355 to 400 HB square level.  DB6 Steel is utilized for standard die block steel, used for manufacturing, passes on for different kinds, such as expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steel and instrument holder. DB6 Properties DB6’s exceptional hot work pre-solidified tool steel has great toughness and high wear resistance. DB6 tool steel is generally used in hard, quenched, tempered and annealed condition, and in strengthening conditions, in ...

H11 is one of the most commonly known chromium hot-work steels. Chromium hot-work tool steels are actually designed as per the classification guideline and system of the AISI. This series of steels range from H1 to H19. The H11 hot-work tool steel can be air-hardened, even in 150mm thickness sections. The steel is having a well-balanced alloy content, which results in very little distortion of the steel during hardening. In countries like India, where searching and choosing the right and top quality H11 chromium hot-work tool steel is quite a task, Virat Steels reigns as the largest stockist of this hot-works tool steel, chromium H11. The tools produced out of Virat Steels H11 , the leading supplier of H11 chromium hot-work tool steel, can be cooled using water without any kind of damage, as these steels have very low carbon and alloy content. Chemical Composition of H11 Carbon 0.33-0.43% Manganese 0.20-0.50 Nickel 0.3 Silicon 0.80-1.20 Chrom...